СВС-50М (СВС-100М)

ELECTRICAL PROTECTIVE EQUIPMENT TEST SYSTEMS

The CBC-M-series systems are designed for acceptance and operational high-voltage testing of personal electrical protective equipment used in electrical installations and insulated hand tools.

The systems can be used without a test bath for general purpose high-voltage AC testing of various solid dielectrics.

Withstand tests are carried out with an AC voltage up to 50 kVRMS (up to 100 kVRMS for CBC-100M) at industrial frequency (f = 50 Hz).

VERSATILITY

CBC-M-series systems include a variety of holders and adaptors allowing to test a wide range of the objects:

✓ rubber insulating gloves and dielectric safety boots;

✓ hand tools with electrical insulation;

✓ voltage detectors and indicators;

✓ discharge rods;

✓ insulating mats.

EASY AND CONVENIENT CONTROL

  • Four pre-set of output voltage levels.
  • Test duration is set and monitored via a built-in timer.
  • Leakage current is displayed throughout the entire test cycle.
  • Upon detecting a breakdown, the system indicates the specific glove the breakdown has occurred in and automatically terminates the test.

SPLIT-UNIT DESIGN

The system is composed of a control unit, test bath and a high-voltage unit (two for CBC-100M). The test procedure is controlled from the control unit, which may be positioned at a safe distance away from high-voltage source and the test bath, ensuring operator safety.

SAFETY

CBC-M-series systems include the following operational safety measures:

✓ Overcurrent protection.

✓ Automatic short-circuiter on the high-voltage unit.

✓ Protective earthing.

✓ Fuses.

✓ Sulphur hexafluoride gas pressure monitoring in the high-voltage unit (units).

✓ Emergency stop button.

* Pictures used herein are for illustration purposes only. *


  СВС-50М СВС-100М
Test modes and parameters "100 V" Output voltage adjustment and indication range 10 … 100 VRMS
Number of simultaneously testable objects 1
"3 kV" Output voltage adjustment and indication range 0.3 … 3 kVRMS
Leakage current threshold 7.6 mA
Number of simultaneously testable objects up to 4
"15 kV" Output voltage adjustment and indication range 1.5 … 15 kVRMS
Leakage current threshold 7.6 mA
Number of simultaneously testable objects up to 4
"50 kV" Output voltage adjustment and indication range 5 … 50 kVRMS -
Leakage current threshold 10 mA -
Number of simultaneously testable objects 1 -
"100 kV" Output voltage adjustment and indication range - 10 … 100 kVRMS
Leakage current threshold - 10 mA
Number of simultaneously testable objects - 1
Relative voltage and leakage current indication error ± 3 %
Safety Grounding

■ Protective earthing

■ Operating grounding

■ Automatic grounding bar

Protection

■ Overcurrent

■ Thermal overload warning

■ Low internal gas pressure warning

High voltage presence signalling ■ Light signalling
High voltage switch off

■ EMERGENCY STOP button

■ Power keylock switch

Power supply and consumption Mains supply voltage 230 VAC, ± 10 %
Mains supply frequency 50 Hz (60 Hz option)
Power consumption up to 0.9 kV•A up to 1.5 kV•A
Physical Control unit dimensions, H × W × D 195 × 315 × 380 mm
Control unit weight 14,5 kg
High-voltage unit dimensions, H × W × D 330 × 365 × 400 mm
High-voltage unit weight 27 kg 27 kg × 2
Bath dimensions, H × W × D 670 × 765 × 465 mm
Bath weight (with accessories, empty) 13,5 kg

 

* Products specifications are subject to change without notice. *


Related products

We use cookies to allow us to better understand how the site is used. By continuing to use this site, you consent to this policy. Click to learn more. Learn more