CBC-50С (CBC-100C)

AUTOMATIC ELECTRICAL PROTECTIVE EQUIPMENT TEST SYSTEMS

Automatic CBC-C series systems are designedfor high-voltage withstand testing of electrical protective equipment and insulated hand tools.

The testing is carried out with an AC voltage up to 50 kVRMS (up to 100 kVRMS for CBC-100C) at industrial frequency (f = 50 Hz).

VERSATILITY

CBC-C-series systems are supplied with a range of holders allowing to test a wide range of objects, including:

✓ rubber insulating gloves and dielectric safety boots;

✓ hand tools with electrical insulation;

✓ voltage indicators;

✓ discharge rods;

✓ insulating mats.

AUTOMATION

CBC-C-series systems are able to operate in a fully automatic mode – apply, stabilise and control the output voltage according to the pre-set parameters, as well as fill and drain the test bath using electric pump as part of the test cycle.

DIGITAL CONTROL

  • The CBC-C-series testers have five pre-set output voltage levels, as well as one user-defined one.
  • Test duration is set and monitored via a built-in timer.
  • Leakage current is displayed throughout the entire test cycle.
  • Upon detecting a breakdown, the system indicates the specific glove the breakdown has occurred in and automatically terminates the test.

MULTI-MODULE DESIGN

The system comprises of control, high-voltage and measurement units, as well as a separate test bath. Such multi-module design allows an operator to remain at a safe distance away from high-voltage circuit and the test bath.

SAFETY

CBC systems of C-series include the following operational safety measures:

✓ Overcurrent protection.

✓ Short-circuiter on the high-voltage outlet.

✓ Protective earthing.

✓ Fuses.

✓ Sulphur hexafluoride gas pressure monitoring in the high-voltage unit (units).

✓ Emergency stop button.

* Pictures used herein are for illustration purposes only. *


  СВС-50C СВС-100C
Test modes and parameters "Neon lamp, 100 V" Output voltage adjustment and indication range 20 … 100 VRMS
"Test bath, 15kV" 1 … 15 kVRMS
"BVI-50" 10 … 50 kVRMS
"BVI-100" - 10 … 100 kVRMS
Leakage current threshold 7.6 mA 10 mA
Number of simultaneously testable objects up to 4
Relative voltage and leakage current indication error ± 3 %
Safety Grounding

■ Protective earthing

■ Operating grounding

■ Automatic grounding bar

Protection

■ Overcurrent

■ Thermal overload warning

■ Low internal gas pressure warning

High voltage presence signalling ■ Light signalling
High voltage switch off

■ EMERGENCY STOP button

■ Power keylock switch

■ Safety interlock

Power supply and consumption Mains supply voltage 230 VAC, ± 10 %
Mains supply frequency 50 Hz (60 Hz option)
Power consumption up to 0.9 kV•A up to 1.5 kV•A
Physical Control unit dimensions, H × W × D 97 × 344 × 193 mm
Control unit weight  
High-voltage unit dimensions, H × W × D 334 × 364 × 381 mm
High-voltage unit weight 26.5 kg 26.5 kg × 2
Measurements unit dimensions, H × W × D 175 × 368 × 254 mm
Measurements unit weight  
Bath dimensions, H × W × D 900 × 700 × 820 mm
Bath weight (with accessories, empty)  

 

* Products specifications are subject to change without notice. *


Задать вопрос

Related products

We use cookies to allow us to better understand how the site is used. By continuing to use this site, you consent to this policy. Click to learn more. Learn more